 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Veyron Snowmaker For pressure washers that flow between 2.5gpm and 3.5gpm |
| 2010-2011 Home Snowmaking Season |
| Veyron Snowmaker |
The Veyron Snowmaker was designed for higher flow rate pressure washers and snowmaking pumps. The Veyron Snowmaker will work with any
pressure washer or snowmaking pump that flows between 2.5gpm and 3.5gpm (max 3500psi). The snowmaker comes with a universal quick
connect fitting installed on the snowmakers water connection. This fitting will work with any pressure washer hose that uses quick connect fittings. If
need be the quick connect fitting can be replaced with a 22mm fitting that is commonly used on electric pressure washers.
The robust internal nucleating system on the Veyron Snowmaker ensures that the snowmaker makes the highest quality snow in even the most
marginal snowmaking conditions. Unlike other internal mix snowmakers that require precise adjustments to the nucleation nozzle, this snowmaker
comes with our automatic nucleation valve. When you hook your pressure washer up to the snowmaker, the valve will automatically flow the
proper amount of water to the nucleation nozzle to mix with the compressed air. The automatic nucleation valve eliminates any chance of operator
error that is common with most internal mix snowguns. The internal mixing on the snowmaker means you can run the snowmaker in windy conditions
without having to worry about making poor quality snow like with external mix snowmakers.
The water and compressed air assemblies on the snowmaker are made from precision machined aluminum. The aluminum construction helps to
further cool the air and water which helps to increase snow production. A built-in bronze filter is located directly behind the pressure washer hose
connection. The filter will filter all of the water from the pressure washer before it enters the snowmaker. By filtering the water before it enters the
snowmaker you will prevent damage to the snowmaking nozzles and automatic nucleation valve. This keeps the efficiency of your snowmaker without
having to replace worn components. Stainless Steel snowmaking nozzles ensure that your nozzles will last you for seasons to come without the
need to replace them.
The snowmaker mounts to a heavy duty aluminum tripod that has fully adjustable, angled legs. The angled leg design allows you to change the
angle of your snowmaker based on wind conditions. When there is little to no wind, you can angle the snowmaker back for increased hangtime to
create superior quality snow. In windy conditions you can angle the snowmaker to a more level position so that you can pinpoint where exactly the
snow will accumulate. The adjustable legs allow the tripod to stand stable on even a steep slope without the need to weigh down the stand. Note: Our
tripod stands are universal with all of our snowmakers. If you already have one of our snowmaker tripods, you can buy just the snowmaker from us to
mount to your tripod. You can also buy just the snowmaker from us if you wish to make your own stand for the snowmaker to save some money.
Depending upon the weather conditions and the flow rate of your pressure washer, the Veyron Snowmaker can make anywhere from 2.5" to 4"
inches of snow per hour over a 25' x 25' area. The actual coverage area of the snowmaker will vary based on the wind speed and whether you
reposition the snowmaker during operation. The snowmaker arrives fully assembled ready to make snow.
Veyron Snowmaker Requirements for Operation:
Weather: Outside temperature of 28ºF or less (snowmaker may work above this temperature if humidity is low enough)
Air Compressor: Minimum of 5cfm@90psi or more
Pressure Washer or Snowmaking Pump: Any pressure washer or snowmaking pump that flows between 2.5gpm and 3.5gpm (max 3500psi )
SEE BELOW FOR AVAILABLE OPTIONS FOR THIS SNOWMAKER (check valves, pressure washer filters etc.)
Veyron Snowmaker Only (NO STAND INCLUDED): $379.99 + $20 Shipping
Veyron Snowmaker with Tripod Stand: $449.99 + $40 Shipping
pressure washer or snowmaking pump that flows between 2.5gpm and 3.5gpm (max 3500psi). The snowmaker comes with a universal quick
connect fitting installed on the snowmakers water connection. This fitting will work with any pressure washer hose that uses quick connect fittings. If
need be the quick connect fitting can be replaced with a 22mm fitting that is commonly used on electric pressure washers.
The robust internal nucleating system on the Veyron Snowmaker ensures that the snowmaker makes the highest quality snow in even the most
marginal snowmaking conditions. Unlike other internal mix snowmakers that require precise adjustments to the nucleation nozzle, this snowmaker
comes with our automatic nucleation valve. When you hook your pressure washer up to the snowmaker, the valve will automatically flow the
proper amount of water to the nucleation nozzle to mix with the compressed air. The automatic nucleation valve eliminates any chance of operator
error that is common with most internal mix snowguns. The internal mixing on the snowmaker means you can run the snowmaker in windy conditions
without having to worry about making poor quality snow like with external mix snowmakers.
The water and compressed air assemblies on the snowmaker are made from precision machined aluminum. The aluminum construction helps to
further cool the air and water which helps to increase snow production. A built-in bronze filter is located directly behind the pressure washer hose
connection. The filter will filter all of the water from the pressure washer before it enters the snowmaker. By filtering the water before it enters the
snowmaker you will prevent damage to the snowmaking nozzles and automatic nucleation valve. This keeps the efficiency of your snowmaker without
having to replace worn components. Stainless Steel snowmaking nozzles ensure that your nozzles will last you for seasons to come without the
need to replace them.
The snowmaker mounts to a heavy duty aluminum tripod that has fully adjustable, angled legs. The angled leg design allows you to change the
angle of your snowmaker based on wind conditions. When there is little to no wind, you can angle the snowmaker back for increased hangtime to
create superior quality snow. In windy conditions you can angle the snowmaker to a more level position so that you can pinpoint where exactly the
snow will accumulate. The adjustable legs allow the tripod to stand stable on even a steep slope without the need to weigh down the stand. Note: Our
tripod stands are universal with all of our snowmakers. If you already have one of our snowmaker tripods, you can buy just the snowmaker from us to
mount to your tripod. You can also buy just the snowmaker from us if you wish to make your own stand for the snowmaker to save some money.
Depending upon the weather conditions and the flow rate of your pressure washer, the Veyron Snowmaker can make anywhere from 2.5" to 4"
inches of snow per hour over a 25' x 25' area. The actual coverage area of the snowmaker will vary based on the wind speed and whether you
reposition the snowmaker during operation. The snowmaker arrives fully assembled ready to make snow.
Veyron Snowmaker Requirements for Operation:
Weather: Outside temperature of 28ºF or less (snowmaker may work above this temperature if humidity is low enough)
Air Compressor: Minimum of 5cfm@90psi or more
Pressure Washer or Snowmaking Pump: Any pressure washer or snowmaking pump that flows between 2.5gpm and 3.5gpm (max 3500psi )
SEE BELOW FOR AVAILABLE OPTIONS FOR THIS SNOWMAKER (check valves, pressure washer filters etc.)
Veyron Snowmaker Only (NO STAND INCLUDED): $379.99 + $20 Shipping
Veyron Snowmaker with Tripod Stand: $449.99 + $40 Shipping
| Would you like to add one of these options to the snowmaker? |
Check Valve- HIGHLY RECOMMENDED
By installing a check valve on the snowguns air connection, you will prevent any chance of water backing down your
airline to compressor in the event your air compressor shuts off because it tripped the breaker or ran out of gas.
The chances of having back flow occur are VERY RARE, but the check valve provides a great peace of mind and is well
worth the small investment to protect your air compressor just in case.
*Check valves are not required on the water connection for this type of snowmaker since a check valve is built-in on
pressure washers to prevent damage to the pump. Therefore no compressed air can back flow to damage your pressure
washer or house pipes in the event your pressure washer turns off.
Install a check valve on the AIR CONNECTION: $20
By installing a check valve on the snowguns air connection, you will prevent any chance of water backing down your
airline to compressor in the event your air compressor shuts off because it tripped the breaker or ran out of gas.
The chances of having back flow occur are VERY RARE, but the check valve provides a great peace of mind and is well
worth the small investment to protect your air compressor just in case.
*Check valves are not required on the water connection for this type of snowmaker since a check valve is built-in on
pressure washers to prevent damage to the pump. Therefore no compressed air can back flow to damage your pressure
washer or house pipes in the event your pressure washer turns off.
Install a check valve on the AIR CONNECTION: $20
In-line Water Filter:
By having this high quality in-line filter installed to your pressure washer in place of a standard garden hose
connection, you will preserve the life of your pressure washer pump. This filter is great for your pressure washer even
when it is not being used for snowmaking. The filter keeps debris from entering your pressure washer pump that can
possibly cause damage. This filter will also filter the water before it goes through the built-in filter on the snowmaker.
Well worth installing on your pressure washer if you have hard water or a high sediment content in your water. Filter
easily removes for cleaning in a matter of seconds without the need for tools! Just twist it open and twist it closed when
your done! Filter has 3/8" male threads on one end and a 3/4" garden hose swivel on the other. FITS MOST
PRESSURE WASHERS without the need for adapters.
In-Line Water Filter for pressure washer: $30
By having this high quality in-line filter installed to your pressure washer in place of a standard garden hose
connection, you will preserve the life of your pressure washer pump. This filter is great for your pressure washer even
when it is not being used for snowmaking. The filter keeps debris from entering your pressure washer pump that can
possibly cause damage. This filter will also filter the water before it goes through the built-in filter on the snowmaker.
Well worth installing on your pressure washer if you have hard water or a high sediment content in your water. Filter
easily removes for cleaning in a matter of seconds without the need for tools! Just twist it open and twist it closed when
your done! Filter has 3/8" male threads on one end and a 3/4" garden hose swivel on the other. FITS MOST
PRESSURE WASHERS without the need for adapters.
In-Line Water Filter for pressure washer: $30
| SnowStorm Snowmaking PO Box 633 Orefield, PA 18069 Phone: 610-481-9696 Email: contact@snowstormsnowmaking.com WE ARE THE HOME SNOWMAKING EXPERTS! Entire Contents Copyright 2005-2011 SnowStorm Snowmaking, LLC |
| Adjustable Angle Tripod Stand |
We Are the Home Snowmaking Experts! Affordable & Easy to Use Home Snow Makers Phone: 610-481-9696 |
| This Page Has Moved. Please Click here to view new Page |